KEYENCE LK-H1W - Manual (Page 54)

3-26 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
Setting the Programs
The method to copy and to initialize the program that is registered in the controller is
described below.
Copy Program
Settings can be copied to the other program No. so that the nuissance to create the
settings repeatedly can be avoided.
Settings of the program where settings are being copied to will be overwritten.
1
Select the desired copy source program No. from the main screen.
Program No. 1 is selected in this example.
2
Click the [Copy] button.
3
Confirm that the [Paste] button becomes active. Then select the program No.
that is selected as the copy target.
Program No. 4 is selected in this example.
4
Click the [Paste] button.
The window prompting your confirmation appears.
Reference
1
2
3
4