KEYENCE LK-H1W - Manual (Page 49)

3-21 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
Sending/Receiving the Settings
The procedure to send or to receive the setting to or from the controller is described
below.
■
Receiving the Settings
Click the [Receive settings from controller] button of the tool bar.
The same operation is obtained by selecting [Receive Settings from Controller] from
[Communication] menu bar.
■
Sending the Settings
Click the [Send settings to controller] button of the tool bar.
The same operation is obtained by selecting [Send settings to controller] from [Communi-
cation] menu bar.
• The communication is disabled when the controller is in the "Setting mode", "Program
Change mode", and "Tolerance Setting mode".
• When the controller is connected to a PC with RS-232C, and when the RS-232C
setting is changed by using [Controller Environment Setting], [PC Communication
Setting] of "LK-Navigator" is also changed automatically when the setting is sent to the
controller.
• While executing sending/receiving setting, the controller enters the "Communication
mode".
Reference
Reference
Note