KEYENCE LK-H1W - Manual (Page 24)

2-12 LK-H1W-M-NO2-E
2 Preparations
2
[LK-Navigator] starts up, and the main screen and the [Select the setting contents to be
displayed at startup] window are displayed.
2
Select [Start up with the default values].
When [Start up with the default values] is selected, the PC settings return to the default values.
‘
Even though [Start up with the default values] is selected here, the controller’s settings do
not return to the default values.
When any other item as shown below is selected, refer to the respective procedures.
• [Read from file.]
Refer to "Procedure for reading from a file" (page 2-13).
• [Read Controller Settings]
Refer to "Procedure to read the setting contents of the connected controller" (page 2-
13).
Note
3
2