KEYENCE LK-H1W - Manual (Page 26)

2-14 LK-H1W-M-NO2-E
2 Preparations
2
1
Select [Read Controller Settings].
2
Click the [OK] button.
The setting contents are read out from the controller.
The communication settings that were in use at the time of quitting "LK-Navigator" last time
are also used.
If the controller is not connected, or if communication fails, an error message is displayed.
The communication setting when the software is started up for the first time is shown
below.
• Interface : USB
If the communication fails, the same operation as that of [Start up with the default values]
is executed. ( page 2-12).
1
2
Reference
Note