KEYENCE LK-H1W - Manual (Page 40)

3-12 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
As the number of Averaging Times decreases, response speed of measured value
increases. As the number of Averaging Times increases, a more stable measurement
value can be obtained.
• Cut-off frequency
When either [LOW-PASS FILTER] or [HIGH-PASS FILTER] is selected by [Type], its cut-off
frequency is requested to be set.
Tolerance Comparator
• Upper limit value
Sets the upper limit value of the Tolerance.
• Lower limit value
Sets the lower limit value of the Tolerance.
• Hysteresis
Sets hysteresis of the Tolerance Comparator.
4. Scaling, Offset
Set the Scaling and Offset.
Reference