KEYENCE LK-H1W - Manual (Page 36)

3-8 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
ALARM Level
Set the alarm threshold level.
Setting range: Low (0) to High (9)
• Low (0): When "Low" is selected, ALARM is issued at the high waveform level, i.e., is
not issued easily.
• High (9): When "High" is selected, ALARM is issued at the low waveform level, i.e., is
issued easily.
6. Copy the Head-A setting. Paste the copied head setting.
This function is used to copy the already established setting of a specific head, to another
head (including the head setting of other program No.)
■
Setting Procedure of ABLE Calibration
1
Click the [ABLE Tuning] button.
The [Head Setting] window appears.
• If you do not want to send the head setting to the controller at the time when
calibration starts, turn OFF the check box [Send the PC setting to the controller while
executing is in progress].
• While executing the [ABLE Tuning], the controller enters the "Communication mode".
2
Click the [Start] button to start calibration.
Then both the [Stop] button and the [Cancel] button become active.
Refer to "Procedure to Copy the Setting of a Head to Another Head" (page 3-9).
3 2
Note