KEYENCE LK-H1W - Manual (Page 43)

3-15 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
■
Procedure to Implement Setting from the Measurement Data
1
Click the [Set from measured data] button.
The window prompting you to confirm the send transmission appears.
2
Click the [Yes] button.
The [Set scaling] window appears.
While executing [Set scaling], the controller enters the "Communication mode".
3
Click the [Set] button of [Input 1] when measuring the reference surface.
The measured value at the reference surface is entered in [Input 1].
1
2
5
6
3
4
Note