KEYENCE LK-H1W - Manual (Page 51)

3-23 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
Automatic Transmission
Set OUT that executes the automatic transmission to the RS-232C interface.
When the controller is connected to a PC with RS-232C, and when the RS-232C setting is
changed by using [Controller Environment Setting], [PC Communication Setting] of "LK-
Navigator" is also changed automatically after the setting is sent to the controller.
2. Energy-saving Mode
Set the energy-saving mode of the controller.
3. Panel lock
Set whether to lock the display panel that is connected to the controller.
4. Program Change
Set the method of switching the programs.
When [Terminal] is selected by [Program Change] and the setting is completed by send-
ing/receiving the setting, the operation of “LK-Navigator” follows the Program No. that is
specified by the LK-G terminal wiring.
Note
Reference