Cannon Instrument CMRV-4500 - Manual (Page 83)

77
CANNON ® Mini-Rotary Viscometer CMRV-4500 Instruction & Operation Manual
Version 1.1e—October, 2011 • CANNON ® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
print options from the Windows ® Print window and click OK to print the
analysis. (Consult your Windows ® manual and printer/print driver docu-
mentation for more information on print settings).
It is also possible to select individual or multiple samples from an
analysis for printing (see next section).
NOTES The font size for printed analyses will be automatically adjusted to fit data
columns to the selected printer paper size. If the font is too small, or if
columns of data are missing or truncated, try using print options to set
your printer to print in landscape instead of portrait orientation. Or create
two analyses for the desired data instead of just one.
The Print option from Main will not be accessible unless the analysis
window is the active window. Click on the desired window to make it the
active window.
Keystrokes for selecting data for printing
You can print data for a selected sample or samples from an on-screen
analysis by highlighting the desired sample data and then using the
Print
option from the VISCPRO ® Main Menu .
To select data for a single sample, click on the line of data associated
with the sample on the screen display. To print a sequential range of
samples, highlight the first sample in the range, then hold down the
S key and click on the last sample in the range. To individually
select test data from the on-screen list box for printing, hold down the
C key while clicking on each desired entry.
When all desired data has been selected, click on Print from the Main
menu. Make certain that the Selection radio button has been selected
from the Print range options. Then click OK to print to the selected
printer.