Using the sample/error filter – Cannon Instrument CMRV-4500 User Manual
Page 80
![background image](/manuals/656168/80/background.png)
74
CANNON
®
Mini-Rotary Viscometer CMRV-4500 Instruction & Operation Manual
Version 1.1e—October, 2011 •
CANNON
®
Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
To automatically update the report with sample data as tests are com-
pleted, click the
Use Dynamic Update
radio button. Click the
Do not
show previous samples
box if you do not wish to display samples
tested prior to the time the analysis is opened.
Use the spin controls
to select the Sample Time Window (the desired
range of recent samples to be included in the analysis). Data from
samples tested within [x] hours will be displayed in the analysis. Note
that the analysis sorting options are disabled if you are using
Dynamic
Update
.
EXAMPLE
If the Do not show previous samples box was unchecked and a Sample
Time Window value of 5 hours was selected, the analysis (when opened)
would display data for all samples tested within the last five hours.
Using the sample/error filter
Use the sample filter to limit the analysis to samples which have been
tested with certain instruments, profile names, by certain technicians, or
which have certain Sample ID characteristics. To filter samples using
these variables, click the
Sample Filter
tab from the analysis configura-
tion window.
NOTE
For the error analysis, this tab is labelled Error Filter and the filter options
are limited to instrument and technician).