Cannon Instrument CMRV-4500 - Manual (Page 11)

5
CANNON ® Mini-Rotary Viscometer CMRV-4500 Instruction & Operation Manual
Version 1.1e—October, 2011 • CANNON ® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
CHAPTER
2
UNPACKING AND ASSEMBLY
Unpacking the CMRV-4500
CAUTION Some CMRV components, including the Air/Water Heat Exchanger, are
quite heavy. To avoid injury, obtain necessary assistance when lifting
and moving shipping cartons and heavier unpacked components.
Remove all components from the shipping container(s).
Remove any and all packing materials (styrofoam, etc.) from the
components.
Verify reception of shipped materials by comparing equipment items
with packing/parts list(s). Report missing items to
CANNON ® Instru-
ment Company immediately.
Inspect each component for signs for damage. Report damages to the
shipper and to the
CANNON ® Instrument Company immediately.
Damaged items Retain all packing materials until the instrument is connected and func-
tioning properly. If any component(s) must be returned to
CANNON ® Instrument Company, the damaged item(s) should be repack-
aged in the original shipping container. Refer to Chapter 19 of this
manual for instructions on returning defective equipment. Customers
outside the United States should contact the local
CANNON ® agent for
procedures on returning products to CANNON ® .
System components Before beginning assembly, please verify that all components listed on
the packing slip are present, including:
CMRV-4500 chassis/controller
Air/Water Heat Exchanger
Main power cord
Pulley-wheel assembly
9 Matched rotors
9 Rings and threads
RS-232 interface cable
Small uncalibrated thermometer (0°C to +105°C)
Large calibrated ASTM thermometer (-46°C to +30°C)
3k-ohm temperature probe
CD-ROM with VISCPRO
® software for Windows ® XP ®