Brookfield DV3T Rheometer - Manual (Page 40)

Brookfield Engineering Labs., Inc. Page 40 Manual No. M13-2100
Figure III-15
The More/Less Bar can be used to reduce the number of parameters shown in the display.
The Speed parameter is active in this view. The operator can change the speed of test without
returning to the Configure Viscosity Test screen.
TIP: If the speed is changed during the execution of a saved test, then the test status will be
changed to “Unsaved Test”. This will also be reflected if the collected data is saved.
View Test includes the Stop Test command key and a Back Arrow navigation key. The Back Arrow
is used to return the display to the Running Viscosity Test view.
III.11 Results
Measurement data is viewed in the Results screen. This screen is presented at the conclusion of a
test or when data is loaded through the View Results selection from the Home Menu.
The DV3T utilizes a comprehensive data format. Data files include the complete set of measurement
results and calculated values along with the test protocol. All elements of the test can be viewed
in the Results screen.
The DV3T Rheometer allows for 5000 total data points per file. When viewing large data files,
additional time is required when moving from the various Results options listed below. There may
be some delay on the screen while the DV3T prepares the data.