Brookfield DV3T Rheometer - Manual (Page 32)

Brookfield Engineering Labs., Inc. Page 32 Manual No. M13-2100
III.7 Selecting Data Collection
The DV3T Rheometer offers several options for data collection. The Data Collection setting is
shown in Configure Viscosity Test directly under the Temperature display. The factory setting is
Single Point (see Figure III-8). Pressing the blue arrow, in this field, will present the Data Collection
screen (see Figure III-9).
Figure III-8
Figure III-9
Single Point: Collect only a single data point when the End Condition is met.