Dillon FI-127 - Manual (Page 6)

6
Keys The FI-127's keys are divided into four primary groups:
Standard Instrument Keys These yellow keys are common to a majority of
applications and include SELECT, PEAK RESET, DATA SEND, ZERO, and UNITS.
The SELECT and UNITS keys are placed next to the annunciators they affect.
SELECT Use to switch between force, peak ad first peak display modes.
SELECT can also be used to accept a current selection and
return to weigh mode from within any menu.
PEAK RESET Use to reset all peak and first peak values. This key may also be
used to capture the current measurement as an entered value
during data entry.
DATA SEND Use to initiate one or more serial outputs.
ZERO Zeros the scale in the display mode. Also clears values in
numeric entry.
UNITS Switches the units of measure in the display mode. Up to three
units of measure are selectable.
Function Keys These oval keys along the right side of the display face are
configurable and are labeled F1, F2, and F3. The default configurations for these
keys are:
F1 Allows load cell selection
F2 Allows entry of ID number
F3 Allows access to cutoff registers.
Front Panel
Figure 1
FI-127 Front Panel
The FI-127's front panel consists of 24 keys and fourteen annunciators.
Standard Instrument Keys
Function Keys