Dillon FI-127 - Manual (Page 44)

44
Inputs submenu Use the inputs submenu, shown in Figure 18, to assign actions to the onboard
hardware inputs. See the table below for the default assignments.
Inputs—Onboard default assignments
Input Action
I Remote Zero Key
2 Remote Print Key
3 Go to Force Display Mode
4 Go to Peak Display Mode
5 Remote (pushbutton) Peak Reset Key
6 Freeze Reading Input (see section 16)
7 Remote Units Key
Input 1-7 - All the actions available under Options/Define/Protocol/
Port n/Input n/Ch./Action are also available under these
items.
The last item in the FI-127 Setup menu is Seal. Use this submenu to set up a
custom password and to set the sealing choices for the unit. The Seal submenu is
shown below.
Seal submenu
Figure 19
Seal submenu
Figure 18
Inputs submenu