Dillon FI-127 - Manual (Page 14)

14
10. After viewing the statistics, press
the ESCAPE key until StAtS. is
displayed, then press MENU to
see the next menu item. . . dELEtE is displayed. Use this to delete
all captured data points.
11. Press the ENTER key. . . donE is displayed if there are no data
point to delete. All is displayed if there
are data points to delete.
12. If there are data points to delete
and you want to delete them, press
ENTER while All is displayed. . . The data points are deleted from
memory and donE is displayed.
13. Press ESCAPE twice to return to
the CAPturE display. Press MENU
to move to the next user menu
item. . . Hour is displayed.
14. Press ENTER to see the currently
set time. . . Time is displayed as HH:MM:SS (24
hour clock) or HH:MM:SS AM (12
hour clock). You may toggle between
the two formats by pressing the
UNITS key.
15. Press ENTER or ESCAPE to
leave the time and format
unchanged or enter a new time
using the numeric keys.
16. After changes have been made to
the time, press the ENTER key to
accept them and start the clock. . . Display shows Hour.
17. Press the MENU key to go to the
next menu item. . . dAY is displayed.
18. Press ENTER to see the currently
set date. . . The date is displayed as MM/DD/YY.
19. Press ENTER to accept this date
or key in a new date and press
ENTER to accept it. . . dAY is displayed.
Day
Hour
Use these keys to navigate
through the menus:
ESCAPE = up
ENTER = down
Е Е Е Е Е = left
MENU = right