Figure 14 serial submenu – Dillon FI-127 User Manual

Page 41

Text mode
Original mode

The next setup menu item is Serial. See Figure 14. Use this configure your serial

communications.

Serial submenu

Figure 14

Serial submenu

Choose which port you are going to configure. The choices for all three ports are

the same as those shown in the Figure 14 under Port 1.

Port n -

Under Busy, select whether ready/busy input is respected.
Choose No to disable ready/busy input. Choose Yes to
enable ready/busy input. If you choose Yes, you may enter
a busy time-out period. This sets how long a port can be
busy before the indicator displays a port busy message.

Baud -

Select the baud rate from these choices: 300,
600, 1200, 2400, 4800, 9600, 19200

Data -

Set the number of data bits: 7 or 8

Parity -

Set the parity. No is default. Other choices are
Even, Odd, Clear and Set.

Stops -

Select the number of stop bits: 1 or 2.