Dillon FI-127 - Manual (Page 55)

55
6. Scroll through the list of available
layout items (see Table 1) by
pressing the MENU key. When
the block you wish to insert in the
layout is displayed, press
ENTER. . . The ACCEPT annunciator goes off and
that item is displayed. Some items (the
ones with asterisks in Table 1) require
that additional information be entered
after selecting the item. For example, if
you choose LF, you must next enter a
value for the number of line feeds you
want, then press ENTER once again.
7. Continue repeating steps 5 & 6
until you have entered all your
layout items. If you make an error,
refer to the next section: Editing
Layouts.
8. To view your newly entered layout,
press MENU repeatedly. . . The indicator scrolls through all the
layout items.
There are two keys to remember when inserting or deleting items in a layout:
+/- will insert and ZERO will delete. We will use the following example to
illustrate how to edit layouts: remove and then replace the line feed from default
layout 01.
1. With LAYoutS displayed,
press ENTER. . . LAY. 01 is displayed.
2. Press ENTER. . . LAbEL, the first item in the layout is
displayed.
3. Press MENU to scroll through
the layout. Stop when the item you
want to delete--1 LF (one line
feed)--is displayed. . . 1 LF is displayed.
4. With 1 LF displayed, press
ZERO. . . The item is deleted and the next item--
in this case, End--is displayed.
5. To insert an item in a layout, you
must display the item it will
precede. In this example, we will
insert a line feed in front of End. . . End is displayed.
Editing layouts
To delete any displayed block, press
the ZERO key.