Dillon FI-127 - Manual (Page 16)

16
Below is a full list of items in default order:
Force A stored force measurement. Displayed with unit of measure and
tension/compression annunciators.
Top A stored peak value. Displayed with unit of measure and tension/
compression annunciators.
First A stored first peak value. Displayed with unit of measure and
tension/compression annunciators.
Disp. A stored measurement. May be Force, Top or First depending on
configuration. Press the ENTER key again to see the value. Dis-
played as F 1234.5 if the stored value is a frozen force. Displayed
with unit of measure and tension/compression annunciators.
Sel. A stored measurement. May be Force, Top or First depending on
configuration. Press the ENTER key again to see the value. Dis-
played with unit of measure and tension/compression annunciators.
Loadcell A stored loadcell number.
Id A stored ID number.
Hour Time the record was stored.
Day Date the record was stored.
27. Press ESCAPE until rEcord is
displayed, then press the MENU
key to move to the next item in
the database submenu. . . dELEtE is displayed. Use the items
under this to delete one or all the
records.
28, If you choose to delete one record
you can scroll through the records
using the Е Е Е Е Е or MENU keys then
press the ENTER key to delete
that one record. . . dELEtE is displayed.
29. With dELEtE displayed, press the
ESCAPE key. . . dATAbASE is displayed.
30. Press the MENU key to move to
the next user menu item. . . LOAdCELL is displayed.
31. Press the ENTER key to see a live
display of loadcell output in either
mV/V or counts. Toggle between
the two views using the UNITS
key.
Use these keys to navigate
through the menus:
ESCAPE = up
ENTER = down
Е Е Е Е Е =
left
MENU = right
Loadcell