Dillon FI-127 - Manual (Page 38)

38
database record.
Db. Id Transmits the Id value stored in the currently selected
database record.
Db. Hour Transmits the time stored in the currently selected database
record.
Db. Day Transmits the date stored in the currently selected database
record.
nn by DB. Specifies that Layout nn is to be used once for every record in
the database, in ascending order. This allows you to generate
database reports. As Layout nn is used for each record, that
record is considered to be the currently selected record for
the purpose of serial output. The actual current record is not
modified by the generation of a report.
Point - Transmits the currently selected data capture point. If
no points exist, blanks are output. During data capture, no
points are considered to exist.
D.C. Force Transmits the force value of the currently selected data point.
D.C. Top Transmits the peak value of the currently selected data point.
D.C. First Transmits the 1st peak value of the currently selected data
point.
D.C. Ave. Transmits the mean value of the stored points.
D.C. Int. Transmits the data capture interval in nnnn format, right
justified with leading zero suppression.
D.C. Hour Transmits the data capture start time.
D.C. Day Transmits the data capture start date.
nn By D.C. Specifies that Layout nn is to be used for every point captured,
in ascending order. This allows you to generate data capture
reports.
End Specifies the end of the layout. Does not transmit anything.
* denotes items that require detailed information. For example: if “LABEL” is
inserted within a layout, you must specify the label to be printed; if “SP” is
inserted, you must specify the number of spaces to be transmitted.
Groups A group defines which ports will print which layouts. A
total of nine groups is available. Six are set up with
defaults. See the list below. Within each group, up to
three ports can output layouts. Port 1 is standard; ports 2
& 3 are offered only if additional serial boards are installed.
Each port is then assigned a layout to print.
You can also choose to inhibit the output while a motion
condition or other invalid condition exists. Choose Yes to
inhibit output and No to allow output during motion.