Dillon FI-127 - Manual (Page 57)

57
3. Press ENTER. . . LAYOut is displayed.
4. a. If you do not want to print from
this port, press MENU . . . NONE is displayed.
b. If you do want to print from this
port, press ENTER, then key
in the correct layout number. . . nn* (layout number) is displayed.
5. Press ENTER. . . Port 1 is displayed. (If you are only
setting up this one port, go to step 8.)
6. You may now select a layout for
Port 2 (if available). With Port 1
displayed, press MENU . . . Port 2 is displayed.
7. Repeat steps 3-5 to set up Port 2.
Press MENU to set up Port 3
(if available). . . Port 3 is displayed.
8. Repeat steps 3-5 to set up Port 3.
Press MENU. . . Inhibit is displayed.
9. Press ENTER . . . YES is displayed.
10. a. If you wish to inhibit the printout
when motion is detected,
press ENTER. . . Yes is selected and Inhibit is displayed.
b. If you do not wish to inhibit the
printout when motion is
detected, press MENU, then
press ENTER. . . No is selected and Inhibit is displayed.
11. Press . . . GrouP 1 is displayed.
12. Press MENU. . . GrouP 2 is displayed.
13. Press ENTER . . . Port 1 is displayed.
14. Repeat steps 3-13 above to set up
all the remaining groups.