Welch Allyn CardioPerfect Workstation Exercise ECG Module - User Manual - Manual (Page 49)

CardioPerfect Workstation
Exercise ECG Module - User Manual
DIR 80012335 Ver. E 49 / 83
Lead order
With this option, you can select the order in which the leads are
displayed. Two ECG lead sequences are provided: the standard
lead sequence or the Cabrera format.
Amplitude unit With this option, you can select the unit in which the measured
amplitudes are expressed. You can select either millimeter or
microvolt. The millimeter setting is dependent on the sensitivity that
you use. The microvolt setting is sensitivity-independent.
Muscle filter
frequency This setting will affect the high cutoff frequency that is used by the
muscle filter.
Minimum last stage
duration Enter the minimum duration of the last stage in seconds.
Show Pacer By checking or unchecking the Show Pacer box, you can control
whether a test will start with artificial pacemaker signal indicators on
or off. During the test and during post-test review you will also be
able to turn the pacemaker marks on or off. For example, see
Pacemaker pulse detection on page 25.
7.2 Exercise ECG settings- Viewing tab
Use the Viewing tab in the ECG settings window to configure how ECGs are displayed on
your Workstation.
The Viewing tab contains the following options:
Colors Here, you can specify individual colors for the background, axis and
grid lines, trends, superimpose and ST markers.
Color schemes This list lets you choose from a number of predefined color schemes.
Selections Here, you can define selections. A selection is a group of events that
appear together on the Averages, ST measurements and ECG
strips, both in print and on the monitor. By defining different
selections, you can customize what should be printed and displayed.
Averages With this option, you can define a selection of events for which you
want to print or display the corresponding averages.
ST table With this option, you can define a selection of events for which you
want to print or display the corresponding ST values.
2x6 With this option, you can define a selection of events for which you
want to print or display the corresponding 2x6 ECG strips.
Visible arrhythmia With this option you can select which arrhythmia will be printed or
displayed.
7.2.1. Selections for viewing and printing
A selection is a collection of events which you choose to allow quick navigation through the
Averages, ST measurements and ECG strips, while reviewing on the monitor. The selection
definition can also affect portions of the summary report.
Which ever selection is chosen for Averages, ST measurements, and ECG strips will drive the
list which is displayed when the mouse moves over the binoculars as described in section
3.2.3 on page 29.