Welch Allyn CardioPerfect Workstation Exercise ECG Module - User Manual - Manual (Page 10)

CardioPerfect Workstation
Exercise ECG Module - User Manual
DIR 80012335 Ver. E 10 / 83
2. Recording an exercise ECG
2.1 The Real-time monitor
The Real-time monitor is displayed when you start a new exercise ECG. During the test, this
window allows you to control and monitor all aspects of the test, and review any recorded
results.
ECG traces
The leads of the ECG. You can select different lead configurations
(1x12, 2x6, 4x3) from the shortcut menu. With the shortcut menu
you can also adjust the chart speed and the sensitivity.
Dividers The dividers in the ECG traces area can be switched on or off from
the shortcut menu.
Average complexes The area to the right of the ECG traces displays the average
complexes.
Options available form the shortcut menu:
Marker option on or off. If the Markers option is enabled the
ST measurements are displayed next to the Average
complex.
The Slope option displays the Slope value next to the
Average complex if the Markers option is enabled.
The reference complex can be displayed on top of the
Average complex.
The current complex can be set as reference.
Note: If square waves are displayed the signal on one or more of the channels is erroneous
see section 2.3.10 on page 25 for more information.
ECG traces
Tabs
Overview area
Tabs
Button bar