Welch Allyn CardioPerfect Workstation Exercise ECG Module - User Manual - Manual (Page 11)

CardioPerfect Workstation
Exercise ECG Module - User Manual
DIR 80012335 Ver. E 11 / 83
Button bar
Start/stop button With the Start (stop) button, you start (stop) an ECG recording.
Next phase The Next phase button displays the name of the next phase for
example Go to recovery. With it you move to the next phase in
the exercise protocol.
Next stage The Next Stage button displays the name of the next stage.
With it you move to the next stage of the current phase in the
exercise protocol.
Hold stage With the Hold stage button you can force the protocol to remain
in the current stage.
Change load With the Change load button you can change the load for the
treadmill or bicycle.
Perception button A record of patient perception for several parameters can be
added to the test with the Perception button
Blood pressure button With the Blood pressure button, you can enter a blood
pressure measurement at any time. Blood pressure can be
measured manually or automatically. This depends on the blood
pressure device.
Comment button With the Comment button, you can add information to the
exercise ECG, like a description of an arrhythmia that has
occurred.
Event button With the Event button, you can indicate an event, like
arrhythmia. When you click the button, Welch Allyn
CardioPerfect Exercise ECG inserts a mark in the full disclosure
view, and adds the event to the event list. The Event button
functions similar to the Comment button, but additional
information cannot be added.
Print button With the Print button, you can print a report. See 7.3.1 on how
to select the report format.
Emergency stop With the Emergency stop button, you can stop the exercise
device. The monitoring of the patient will continue. See page 15
for important information regarding the Emergency stop
function.