Kontron AT8901M CLI - Manual (Page 285)

AT8901M Management Commands
Page 6 - 33 AT8901M CLI Reference Manual
Format
copy
//>
nvram:clibanner
copy nvram:clibanner
//>
Mode Privileged EXEC
6.11.2 set prompt
This command changes the name of the prompt. The length of name may be up to 64
alphanumeric characters.
Format
set prompt
Mode Privileged EXEC
6.12 Bootcycle commands
6.12.1 show boardinfo bootcycle
This command displays whether a bootcycle-detection is activated and (if activated)
the related parameters.
Format
show boardinfo bootcycle
Mode Priviliged Exec
6.12.2 set board bootcycle
This command activates/deactivates a bootcycle-detection and (if activated) sets the
related parameters. Parameter ‘none’ deactivates the bootcycle detection. Parameters
‘event’ and ‘pwr-down’ activate the bootcycle detection and execute an action if the
number of , checked in seconds, is reached. The executed action is
the generation of an event and additionally for ‘pwr-down’ switch off the Power-PC.
Format s
et board bootcycle none
set board bootcycle event
set board bootcycle pwr-down
Mode Priviliged Exec
6.13 Watchdog support
The IPMC based hardware watchdog supervises board operation. There are 4 distinct
stages in the lifecycle of the system where different watchdog timers and actions are
used.
All watchdog parameters are stored in the bootloader environment. All times are in
seconds. All watchdog events will power cycle the board when the watchdog expires.
•
BIST watchdog during BIST
• OS loader watchdog during loading of kernel and INITRD
• Application Startup watchdog during startup of switching application
• Application Running watchdog during normal execution of switching application
6.13.1 set watchdog
This command configures the watchdog. It sets the timeout for different watchdog
(during BIST, during loading of kernel and INITRD, during startup of switching