Kontron AT8901M CLI - Manual (Page 268)

Management Commands AT8901M
AT8901M CLI Reference Manual Page 6 - 16
NOTE: Community names in the SNMP Community Table must be unique.
When making multiple entries using the same community name, the
first entry is kept and processed and all duplicate entries are ignored.
Default public and private, which you can rename
default values for the remaining four community names are blank
Format
snmp-server community
Mode Global Config
6.6.2.1 no snmp-server community
This command removes this community name from the table. The is the
community name to be deleted.
Format
no snmp-server community
Mode Global Config
6.6.3 snmp-server community ipaddr
This command sets a client IP address for an SNMP community. The address is the
associated community SNMP packet sending address and is used along with the client
IP mask value to denote a range of IP addresses from which SNMP clients may use that
community to access the device. A value of 0.0.0.0 allows access from any IP address.
Otherwise, this value is ANDed with the mask to determine the range of allowed client
IP addresses. The name is the applicable community name.
Default 0.0.0.0
Format
snmp-server community ipaddr
Mode Global Config
6.6.3.1 no snmp-server community ipaddr
This command sets a client IP address for an SNMP community to 0.0.0.0. The name is
the applicable community name.
Format
no snmp-server community ipaddr
Mode Global Config
6.6.4 snmp-server community ipmask
This command sets a client IP mask for an SNMP community. The address is the
associated community SNMP packet sending address and is used along with the client
IP address value to denote a range of IP addresses from which SNMP clients may use
that community to access the device. A value of 255.255.255.255 will allow access
from only one station, and will use that machine's IP address for the client IP address.
A value of 0.0.0.0 will allow access from any IP address. The name is the applicable
community name.
Default 0.0.0.0
Format
snmp-server community ipmask
Mode Global Config