3 bootpdhcprelay maxhopcount, 4 bootpdhcprelay minwaittime, 5 bootpdhcprelay serverip – Kontron AT8901M CLI User Manual
Page 137: Bootpdhcprelay maxhopcount - 23, Bootpdhcprelay minwaittime - 23, Bootpdhcprelay serverip - 23, At8901m routing commands
AT8901M
Routing Commands
Page 3 - 23
AT8901M CLI Reference Manual
3.6.2.1
no bootpdhcprelay enable
This command disables the forwarding of relay requests for BootP/DHCP Relay on the
system.
Format
no bootpdhcprelay enable
Mode
Global Config
3.6.3
bootpdhcprelay maxhopcount
This command configures the maximum allowable relay agent hops for BootP/DHCP
Relay on the system. The
parameter has a range of 1 to 16.
Default
4
Format
bootpdhcprelay maxhopcount
<1-16>
Mode
Global Config
3.6.3.1
no bootpdhcprelay maxhopcount
This command configures the default maximum allowable relay agent hops for BootP/
DHCP Relay on the system.
Format
no bootpdhcprelay maxhopcount
Mode
Global Config
3.6.4
bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay
on the system. When the BOOTP relay agent receives a BOOTREQUEST message, it
MAY use the seconds-since-client-began-booting field of the request as a factor in
deciding whether to relay the request or not. The parameter has a range of 0 to 100
seconds.
Default
0
Format
bootpdhcprelay minwaittime
<0-100>
Mode
Global Config
3.6.4.1
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP
Relay on the system.
Format
no bootpdhcprelay minwaittime
Mode
Global Config
3.6.5
bootpdhcprelay serverip
This command configures the server IP address for BootP/DHCP Relay on the system.
The <
ipaddr
> parameter is an IP address in a 4-digit dotted decimal format.
Default
0.0.0.0
Format
bootpdhcprelay serverip
Mode
Global Config