Kontron AT8901M CLI - Manual (Page 156)

Routing Commands AT8901M
AT8901M CLI Reference Manual Page 3 - 42
Transit Delay Interval A number representing the OSPF Transit Delay for the speci-
fied interface.
Authentication Type The OSPF Authentication Type for the specified interface are:
none, simple, and encrypt.
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type Broadcast LANs, such as Ethernet and IEEE 802.5, take the
value
broadcast
. The OSPF Interface Type will be 'broadcast'.
State The OSPF Interface States are: down, loopback, waiting, point-to-
point, designated router, and backup designated router.
Designated Router The router ID representing the designated router.
Backup Designated Router The router ID representing the backup designated
router.
Number of Link Events The number of link events.
Metric Cost The cost of the OSPF interface.
3.7.47 show ip ospf interface brief
This command displays brief information for the IFO object or virtual interface tables.
Format
show ip ospf interface brief
Modes Privileged EXEC
User EXEC
Interface Valid slot and port number separated by forward slashes.
OSPF Admin Mode States whether OSPF is enabled or disabled on a router inter-
face.
OSPF Area ID The OSPF Area Id for the specified interface.
Router Priority A number representing the OSPF Priority for the specified interface.
Hello Interval A number representing the OSPF Hello Interval for the specified inter-
face.
Dead Interval A number representing the OSPF Dead Interval for the specified inter-
face.
Retransmit Interval A number representing the OSPF Retransmit Interval for the
specified interface.
Retransmit Delay Interval A number representing the OSPF Transit Delay for the
specified interface.
LSA Ack Interval A number representing the OSPF LSA Acknowledgement Interval
for the specified interface.
3.7.48 show ip ospf interface stats
This command displays the statistics for a specific interface. The information below
will only be displayed if OSPF is enabled.
Format
show ip ospf interface stats
<slot/port>