Kontron AT8901M CLI - Manual (Page 183)

AT8901M Quality of Service (QoS) Commands
Page 4 - 15 AT8901M CLI Reference Manual
4.4.2 drop
This command specifies that all packets for the associated traffic stream are to be
dropped at ingress.
Format
drop
Mode Policy-Class-Map Config
Incompatibilities Assign Queue, Mark (all forms), Mirror, Police, Redirect
4.4.3 mirror
This command specifies that all incoming packets for the associated traffic stream are
copied to a specific egress interface (physical port or LAG).
NOTE: This command is not available on the Broadcom 5630x platform.
Format
mirror <slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop, Redirect
4.4.4 redirect
This command specifies that all incoming packets for the associated traffic stream are
redirected to a specific egress interface (physical port or port-channel).
NOTE: This command is not available on the Broadcom 5630x platform.
Format
redirect <
slot/port
>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mirror
4.4.5 conform-color
Use this command to enable color-aware traffic policing and define the conform-color
class map. Used in conjunction with the police command where the fields for the
conform level are specified. The parameter is the name of an
existing Diffserv class map.
NOTE: This command may only be used after specifying a police command
for the policy-class instance.
Format
conform-color
Mode Policy-Class-Map Config
4.4.6 class
This command creates an instance of a class definition within the specified policy for
the purpose of defining treatment of the traffic class through subsequent policy
attribute statements. The
>
is the name of an existing DiffServ class.
NOTE: This command causes the specified policy to create a reference to the
class definition.