Kontron AT8901M CLI - Manual (Page 220)

Utility Commands AT8901M
AT8901M CLI Reference Manual Page 5 - 20
5.4 Logging Commands
This section describes the commands you use to configure system logging, and to view
logs and the logging settings.
5.4.1 logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default
disabled; critical when enabled
Format
logging buffered
Mode
Global Config
5.4.1.1 no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode
Global Config
5.4.2 logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default
enabled
Format
logging buffered wrap
Mode
Privileged EXEC
5.4.2.1 no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop
when the log file capacity is full.
Format
no logging buffered wrap
Mode
Privileged EXEC
5.4.3 logging cli-command
This command enables the CLI command logging feature, which enables the
FASTPATH software to log all CLI commands issued on the system.
Default
enabled
Format
logging cli-command
Mode
Global Config
5.4.3.1 no logging cli-command
This command disables the CLI command Logging feature.
Format
no logging cli-command
Mode
Global Config