1 port-channel hash multicast, 2 show port-channel hash multicast, 3 port-channel hash unicast – Kontron AT8901M CLI User Manual
Page 243: 4 show port-channel hash unicast, At8901m utility commands
AT8901M
Utility Commands
Page 5 - 43
AT8901M CLI Reference Manual
5.10
Enhanced Port-Channel / LAG and Multicast Commands
5.10.1
port-channel hash multicast
This command configures the multicast hash algorithm. The command allows the user
to globally select the hash algorithm used for distribution of NUC (Non Unicast)
traffic. This includes broadcast and multicast traffic, as well as unicast traffic to
unknown destination MAC address (DLF, flooded). Traffic distribution may be based
on Source address (sa), destination address (da), port number or any combination
thereof.
Format
port-channel hash multicast sa
port-channel hash multicast sa-port
port-channel hash multicast da
port-channel hash multicast da-port
port-channel hash multicast port
port-channel hash multicast sa-da
port-channel hash multicast sa-da-port
Mode
Global Config
5.10.2
show port-channel hash multicast
This command displays current port-channel hash multicast settings.
Format
show port-channel hash multicast
Mode
Privileged Exec
5.10.3
port-channel hash unicast
This command configures the unicast hash algorithm. The command allows the user to
select the hash algorithm used for distribution of unicast traffic. This includes all
unicast ethernet traffic that is targeted at MAC addresses that have previously learned.
This explicitely excludes flooded traffic (e.g. unknown destination MAC address,
broadcast traffic etc.). Traffic distribution may be based on MAC address (source
address (sa), destination address (da) or both (sada) or IP address (source address (sip),
destination address (dip) or both (sipdip). The default is “sipdip”.
Format
port-channel hash unicast sa
port-channel hash unicast da
port-channel hash unicast sada
port-channel hash unicast sip
port-channel hash unicast dip
port-channel hash unicast sipdip
Mode
Interface Config
5.10.4
show port-channel hash unicast
This command displays current port-channel hash unicast settings. The command
shows the port-channel hash unicast settings for a specified or all existing port-
channels.
Format
show port-channel hash unicast all
show port-channel hash unicast
Mode
Privileged Exec