Kontron AT8901M CLI - Manual (Page 173)

AT8901M Quality of Service (QoS) Commands
Page 4 - 5 AT8901M CLI Reference Manual
Modes Global Config
Interface Config
4.1.7 show classofservice dot1p-mapping
This command displays the current Dot1p (802.1p) priority mapping to internal traffic
classes for a specific interface. The
<
slot/port
>
parameter is optional and is only valid
on platforms that support independent per-port class of service mappings. If specified,
the 802.1p mapping table of the interface is displayed. If omitted, the most recent
global configuration settings are displayed. For more information, see 2.5
“Provisioning (IEEE 802.1p) Commands” on page 2 - 29.
Format
show classofservice dot1p-mapping [<slot/port>]
Mode Privileged EXEC
The following information is repeated for each user priority.
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the user priority
value is mapped.
4.1.8 show classofservice ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes
for a specific interface. The slot/port parameter is optional and is only valid on
platforms that support independent per-port class of service mappings. If specified, the
IP Precedence mapping table of the interface is displayed. If omitted, the most recent
global configuration settings are displayed.
Format
show classofservice ip-precedence-mapping [<slot/port>]
Mode Privileged EXEC
The following information is repeated for each user priority.
IP Precedence The IP Precedence value.
Traffic Class The traffic class internal queue identifier to which the IP Precedence
value is mapped.
4.1.9 show classofservice ip-dscp-mapping
This command displays the current IP DSCP mapping to internal traffic classes for the
global configuration settings.
Format
show classofservice ip-dscp-mapping
Mode Privileged EXEC
The following information is repeated for each user priority.
IP DSCP The IP DSCP value.
Traffic Class The traffic class internal queue identifier to which the IP DSCP value
is mapped.