Kontron AT8901M CLI - Manual (Page 225)

AT8901M Utility Commands
Page 5 - 25 AT8901M CLI Reference Manual
5.5.7 clear traplog
This command clears the trap log.
Format
clear traplog
Mode
Privileged EXEC
5.5.8 clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format
clear vlan
Mode
Privileged EXEC
5.5.9 clear board event-log
This command deletes all event-log records
Format
clear board event-log
Mode
Privileged EXEC
5.5.10 enable passwd
This command prompts you to change the Privileged EXEC password. Passwords are a
maximum of eight alphanumeric characters. The password is case sensitive.
Format
enable passwd
Mode
User EXEC
5.5.11 logout
This command closes the current telnet connection or resets the current serial
connection.
NOTE: Save configuration changes before logging out.
Format
logout
Modes
Privileged EXEC
User EXEC
5.5.12 set bootstopkey
This command sets the bootstop key. With this key the booting process can be stopped.
The key name is “stop”. This is the default setting.
Format
set bootstopkey
Mode
Privileged EXEC
5.5.12.1 no set bootstopkey
This command resets the bootstop key. The boot process can not be interrupted.
Format
no set bootstopkey
Mode
Privileged EXEC