Kontron AT8901M CLI - Manual (Page 107)

AT8901M Switching Commands
Page 2 - 71 AT8901M CLI Reference Manual
Notify Shows whether the interface sends remote data change notifications.
TLVs Shows whether the interface sends optional TLVs in the LLDPDUs.
The TLV codes can be 0 (Port Description), 1 (System Name), 2 (Sys-
tem Description), or 3 (System Capability).
Mgmt Shows whether the interface transmits system management address
information in the LLDPDUs.
2.17.12 show lldp statistics
Use this command to display the current LLDP traffic and remote table statistics for a
specific interface or for all interfaces.
Format
show lldp statistics {<
slot/port
> | all}
Mode Privileged EXEC
Last Update Shows the amount of time since the last update to the remote table in
days, hours, minutes, and seconds.
Total Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Total Drops Total number of times the complete remote data received was not
inserted due to insufficient resources.
Total Ageouts Total number of times a complete remote data entry was deleted
because the Time to Live interval expired.
The table contains the following column headings:
Interface Shows the interface in slot/port format.
Transmit Total Total number of LLDP packets transmitted on the port.
Receive Total Total number of LLDP packets received on the port.
Discards
Total number of LLDP frames discarded on the port for any reason.
Errors The number of invalid LLDP frames received on the port.
Ageouts Total number of times a complete remote data entry was deleted for
the port because the Time to Live interval expired.
TVL Discards Shows the number of TLVs discarded
TVL Unknowns Total number of LLDP TLVs received on the port where the type
value is in the reserved range, and not recognized.
2.17.13 show lldp remote-device
Use this command to display summary information about remote devices that transmit
current LLDP data to the system. You can show information about LLDP remote data
received on all ports or on a specific port.
Format
show lldp remote-device {<slot/port> | all}
Mode Privileged EXEC
Local Interface Identifies the interface that received the LLDPDU from the remote
device.