Kontron AT8901M CLI - Manual (Page 140)

Routing Commands AT8901M
AT8901M CLI Reference Manual Page 3 - 26
Format
no area nssa
Mode Router OSPF Config
3.7.7 area nssa default-info-originate (OSPF)
This command configures the metric value and type for the default route advertised
into the NSSA. The optional metric parameter specifies the metric of the default route
and is to be in a range of 1-16777214. If no metric is specified, the default value is
****. The metric type can be comparable (nssa-external 1) or non-comparable (nssa-
external 2).
Format
area nssa default-info-originate
[] [{com-
parable | non-comparable}]
Mode Router OSPF Config
3.7.7.1 no area nssa default-info-originate (OSPF)
This command disables the default route advertised into the NSSA.
Format
no area nssa default-info-originate
[]
[{comparable | non-comparable}]
Mode Router OSPF Config
3.7.8 area nssa no-redistribute (OSPF)
This command configures the NSSA Area Border router (ABR) so that learned
external routes will not be redistributed to the NSSA.
Format
area nssa no-redistribute
Mode Router OSPF Config
3.7.8.1 no area nssa no-redistribute (OSPF)
This command disables the NSSA ABR so that learned external routes are
redistributed to the NSSA.
Format
no area nssa no-redistribute
Mode Router OSPF Config
3.7.9 area nssa no-summary (OSPF)
This command configures the NSSA so that summary LSAs are not advertised into the
NSSA.
Format
area nssa no-summary
Mode Router OSPF Config
3.7.9.1 no area nssa no-summary (OSPF)
This command disables nssa from the summary LSAs.
Format
no area nssa no-summary
Mode Router OSPF Config