Actuator mounting, Maintenance, Cross-reference – KMC Controls HPO-5074 User Manual
Page 2: Important notices
HPO-5074
2
Installation Guide
© 2014 KMC Controls, Inc.
050-019-72B
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com; [email protected]
Important Notices
The material in this document is for information purposes
only. The contents and the product it describes are subject
to change without notice. KMC Controls, Inc. makes no
representations or warranties with respect to this docu-
ment. In no event shall KMC Controls, Inc. be liable for
any damages, direct or incidental, arising out of or related
to the use of this document.
NOTE: For more information, see the relevant
data sheet and installation guide for the
CEP-4703/4703V, MEP-4000/4800, MEP-
4200/4500/4900 series actuators and the
VEB-43 and VEB-46 series valves!
Maintenance
No routine maintenance is required. Each compo-
nent is designed for dependable, long-term reliabil-
ity, and performance. Careful installation will also
ensure long-term reliability and performance.
Actuator Mounting
Illustration 5—Locking the Assembled Valve
Illustration 6—Assembled Valve
Illustration 4—MEP-4002V and Assembled Valve Body
High
Pressure
Indicator
(Not on VSI
Valves)
Valve
Base
Stem “T” Indicator
1. On the actuator, push and hold the manual
release lever (at the rear of the actuator) and
rotate the actuator to the full counter-clockwise
position so that the handle is pointing out in a
straight line from the actuator. See Illustrations 4
and 6.
2. The valve stem must be oriented as shown in
Illustration 2 or 3. If necessary, use a needle-nose
pliers to carefully reposition it.
3. Push the actuator onto the valve stem until it is
fully seated.
4. Insert the bail all the way into the two holes until
it clicks in position and locks the assembly. See
Illustration 5.
5. Push and hold the manual release button and
verify operation of the assembled valve.
Cross-Reference
Typical
Application
3-way H/C
Water
2-way H/C
Water
2-way PIC-V
H/C Water
KMC Valve
Body
VFB-46__BX,
VFB-46__BC*
VFB-43__BX,
VFB-43__BC*
N/A
KMC Valve
VEB-
46___B__
VEB-
43___B__
Valve
Solutions
(VSI)
UR3 Series
UR2 Series
SPV Series
Griswold
UR3 Series
UR2 Series
SPV Series
Delta Control
Products
ST Series
ST Series
ATI Series
Honeywell
VBN3 Series
VBN2 Series
N/A
Siemens
599 Series
599 Series
*VFB-4___BC valve bodies come with the HPO-5074 installed.