KMC Controls MEP-425 Series User Manual
Controlset, Mep-425 series

Installation Instructions
Instructions de montage
Instrucciones de montaje
Document No. 129-360
Rev. 1, December, 2001
ControlSet
®
MEP-425 Series
Rotary spring return actuator
Servomoteur à action angulaire avec ressort de rappel
Accionador giratorio de retorno por muelle
Contents
Contenu
Contenido
Page 1 of 7
a
b
j
e
g
f
h
d
c
4.8 x 13
DIN 7981
EA0879R2
MANUAL
OVERRIDE
Hints/Warnings
Indications/Mise en garde
Indicaciones/Consejos
Keep this instruction guide
together with the actuator or
with the plant documentation!
Warning
Do not open the actuator.
Spring preload
Factory set preload: 5°.
Unload by power or
mechanical.
Cette instruction est à conserver avec le
servomoteur ou avec la documentation
de l’installation !
Attention
Le servomoteur ne doit pas être ouvert.
Précontrainte du ressort
Précontrainte réglée à l’usine : 5°
Remise à zéro electrique ou mécanique.
¡Conserve las instrucciones con el
accionador o con la documentación
de la planta!
Precaución
No abra el accionador.
Carga previa del muelle
Valor de fábrica de carga previa: 5°
Vuelta a cero eléctrica o mecánica.
a. Actuator
b. Self-centering shaft
adapter
c. Position indicator
d. Shaft adapter locking
clip
e. Position indicator
adapter
f. Mounting
bracket
g. Mounting screws
h. 3 mm hex wrench
i. Auxiliary
switch
adjustment tool