Accessories, Specifications, Maintenance – KMC Controls STE-1422 User Manual
Page 2: Configuration, More information, Important notices
STE-1421/1422
2
Installation Guide
© 2014 KMC Controls, Inc.
717-019-17E
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
Specifications
Standard Lengths
4" (STE-1421) or 6" (STE-1422)
Sensor
Type III, 10K ohm @ 77° F (25° C)
Temperature Limits –4 to 221° F (–20 to 105° C)
Wiring
22 AWG wire leads
Case
Plastic standard; metal optional
Accessories
HMO-4532
Thermal compound (1 oz.) for
thermowells
HMO-4534
4-inch 304 stainless-steel ther-
mowell (for the STE-1421)
HMO-4544
6-inch 304 stainless-steel ther-
mowell (for the STE-1422)
1.75"
Stem Length (see description)
0.260"
0.500"
0.25"
Maintenance
No routine maintenance is required. Careful
installation will ensure long term reliability and
performance.
Configuration
For controller configuration, see the
on the KMC web site.
More Information
For additional information,
on the KMC
web site.
For troubleshooting, con-
troller configuration, and
other information, see the
on the KMC
web site.
Important Notices
The KMC logo and KMC Controls are registered
trademarks of KMC Controls, Inc.
All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in
any form by any means without the written permis-
sion of KMC Controls, Inc.
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice.
KMC Controls, Inc. makes no representations or
warranties with respect to this document. In no event
shall KMC Controls, Inc. be liable for any damages,
direct or incidental, arising out of or related to the
use of this document.
NOTE: NPT Thread Size = 1/2 inch