AVer EH6216H+ user manual - Manual (Page 96)

88
3.6.3 To Search Using the Visual Search
1. Click Visual Search.
2. In the Visual Search Setting dialog box, select the Camera number and the date. Then click OK.
3. When a series of frames appear by date, click on the frame to display another series of frames and
search by every Hour of that date, every 3Minutes of that hour, every 10 Seconds of that minute, every
Second of that 10 seconds. To go back, click
. To view from the selected frame and close event
search, click .
3.6.4 To Search Using the Event Search
1. Click on the video screen on where you want to search.
2. Click Event Search. The Event Search text (red) would appear at the lower left corner of the screen.
3. In the Event Search Setting dialog box, check the type of condition you want to search. The video search
would stop at the frame that matches the condition. To keep on searching click Find Next( ) button.
4. You may also set to search and list all the result. In the Search Duration section, set the Begin Time and
End Time. Set the Searching Interval time that system won ’t list out the same events in a period of time
that user has setup. Then, click OK to start searching.
5. When the Event list appear, click and select the item you want to view.