AVer EH6216H+ user manual - Manual (Page 77)

69
CHAPTER 3
3.2.3 To Setup Analog Camera
Click Default will back to the factory default value.
i
EH6108H
+
only supports 8 channels.
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as Analog Camera.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
- Enable Audio
Enable/disable audio of the camera.
- Name
Click Edit to change the camera name.
i
DVR supports Traditional Chinese characters on remote site (remote setup).
- Description
Add a short comment
(5) Video Adjustment
Adjust the Brightness, Contrast, Hue, Sharpness, and Saturation of the camera.