AVer EH6216H+ user manual - Manual (Page 42)

34
2.2 Familiarizing the Buttons in Preview Mode
Name Function
(1) Exit
- Reboot: To restart the DVR system. It is required to enter the password
- Power OFF: To shut down the DVR system. It is required to enter the password
- Login: Using different ID to login to DVR system.
- Logout: To set a system idle time and the DVR system will automatically logout system
(see also
Chapter 2.2.1 ).
- Cancel: To return to DVR application.
(2) Split Screen
Mode
Select from 6 different split screen types to view all the camera, or one camera over the other
or alongside on a single screen. It also allows you to switch and view different camera
number.
i – When you are in single screen mode, Right click and Drag a square on the area you want to enlarge.
Right-click on screen again, the screen view will back to normal view.
– When you are in full screen mode, partial enlarges does not support.
(3) Record Start/stop video recording.
(4) EMap Display the map in each area, and the location of camera/ sensor/ relay and the warning
(see also
Chapter 2.2.2 ).
(5) Network Enable/disable remote system access. This feature allows you to access DVR server from a
remote location via internet connection.
(6) Setup Configure the system settings. (see also Chapter 3 )
(7) PTZ Access PTZ control panel. (see also Chapter 2.2.3 )