AVer EH6216H+ user manual - Manual (Page 144)

136
4.3.1.2 To Search Using the Visual Search
1. Click Visual Search.
2. In the Visual Search Setting dialog box, select the Camera number and the date. Then click OK.
3. When a series of frames appear by date, click on the frame to display another series of frames and
search by every Hour of that date, every 3Minutes of that hour, every 10 Seconds of that minute, every
Second of that 10 seconds. To go back, click
. To view from the selected frame and close event
search, click .
4.3.1.3 To Search Using the Intelligent Search
1. Click on the video screen on where you want to search.
2. Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner of the
screen.
3. When the Intelligent Search Setting dialog box and motion detector frame appear, you may adjust the
sensitivity bar and the motion detector frame size and location. To set motion detector frame size and
location, left click and drag on the screen. Then, click OK to start searching. The video search would stop
at the frame that matches the condition. To keep on searching click . You may also set to search and
list all the result. Just check the List box. In the Search Duration section set the Begin Time and End Time.
Set the Searching Interval time that system won ’t list out the same events in a period of time that user has
setup. Then, click OK to start searching.