AVer EH6216H+ user manual - Manual (Page 79)

71
CHAPTER 3
- Description
Add a short comment
(5) IP Camera Information
- IP
Enter the IP address of the camera
- Port
The port for connection
- User ID
Enter the user id that for connecting authority
- Password
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
- Connect
Click to connect the camera when all configurations are set.
3.2.5 To Setup Camera from the Remote DVR(Flexible Mode)
When user select IP camera resolution mode as Flexible mode in System Setting, the Camera Setting UI is
displayed the IP camera channel
’s resolution value that has been calculated and transform by DVR system.
In Flexible Mode, DVR system supports 16MP total for 16 IP camera channels (In any code type – H.264,
MEPG4, MEPG). The 16MB is divided into 8MP each for odd and event channels. A channel maximum
supported value is 5MP.
Click Default will back to the factory default value.
i
EH6108H
+
only supports 8 channels.
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.