AVer EH6216H+ user manual - Manual (Page 69)

61
CHAPTER 3
3.2.2 To Setup IP Camera(Flexible Mode)
When user select IP camera resolution mode as Flexible mode in System Setting, the Camera Setting UI is
displayed the IP camera channel
’s resolution value that has been calculated and transform by DVR system.
In Flexible Mode, DVR system supports 16MP total for 16 IP camera channels (In any code type – H.264,
MEPG4, MEPG). The 16MB is divided into 8MP each for odd and event channels. A channel maximum
supported value is 5MP.
Click Default will back to the factory default value.
i
EH6108H
+
only supports 8 channels.
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as IP Camera.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
- Enable Audio
Enable/disable audio of the camera if IP camera has supported.