AVer EH6216H+ user manual - Manual (Page 122)

114
(4) Remote Camera Setting
- Description
Add a short comment
- IP
Enter the IP address of the camera
- Port
The port for connection
- User ID
Enter the user id that for connecting authority
- Password
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
4.1.4.3 Record Setting
In the Recording setup windows, click OK to accept the new settings, click Exit to exit without saving, and
click Default to revert back to original factory setting.
Record Setting of IP Camera
i
EH6108H
+
only supports 8 channels.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click on the camera icon. The camera icon turns red when it is selected.