AVer EH6216H+ user manual - Manual (Page 128)

120
4.1.4.5 Alarm Setting
In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the
selected alarm setting, click Update to save the setting, Exit to exit without saving, and Default to revert
back to original factory setting.
1. Click Add to insert and set a new alarm setting. Click the items in the (9) Alarm Setting List if you want to
modify the alarm setting.
2. In (1) No./Name/Description enter alarm name and description. Alarm No. will be created by DVR
system.
3. In (2) Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Select the time and
click the block you want to activate or deactivate the alarm function. When it is deactivated the color of the
block turns white.
4. In (3) Conditions , you can set “Trigger if any” to activate if it falls to one of the conditions or “Trigger if
all ” to activate if it falls to all conditions.
5. In (4) Camera section, select and click on the camera number (01 to 16) in Motion Detected and Video
Loss to set the condition for the system to alarm.

Continue trigger duration: Set a time period that when sensor has been trigger and stay in the same
status for that period, then the alarm will be sent out.

Motion Detected: Click on the camera number to the motion condition for the system to alarm. Click
Detail to setup the system to send out the alarm when motion has been detected to last the time that
user has entered in Continuous trigger duration.