AVer EH6216H+ user manual - Manual (Page 104)

96
- Send E-mail
Send an electronic text message. Beside the Send Email check box, click Detail.
In the E-mail Setting dialog box, click OK to exit and save the setting and Cancel to exit without saving
the setting.
(1) Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication check box and enter ID and Password.
(2) Mail
Fill the mailing information. Click Test Account button can exam the mail is workable or not.
 From: Enter the sender e-mail address.
 To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).
 Subject: Enter the message title.
 Message: Type the message.
 Notice Interval: Set a time gap for mail re-sending when mail has failed to send.
(3) Snapshot
When send out the email, the DVR system will snapshot image of the selected camera channel.
 Select Camera: Select the channel that will be snapshot when alarm email is sending out.
 Video Size: Select the size of vide that will be taken when snapshot. Auto means default size
that chosen by DVR system.
- File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol).
 FTP Server Setting
 FTP Server: Enter FTP server ’s IP address
 Port: Enter the port number of FTP connection.
 ID& Password: Enter the ID and Password that use to login FTP server.
 Upload Option
 Select Camera: Select the camera that the images will be captured and send when the any
alarm is triggered.
 Upload Video Clip: Mark to enable the send the recorded image before and after alarm occurs,
enter the time that before alarm occurs in Before alarm(sec.) and After alarm.