AVer EH6216H+ user manual - Manual (Page 105)

97
CHAPTER 3
- Start Recording
Record the video from the selected camera.
1. Beside the Start Recording check box, click
Detail.
2. In the Alarm Recording Setting dialog box,
select the camera to enable/disable video
recording. Enable All to select all cameras.
3. In the Frame Rate selection, select As Setting
to record the number of frames based on the
Recording Setting.
4. In the Start Record prior text box, mark and set
the number in second for the program to begin
recording before the alarm has been trigger. The
time range is 1~10 seconds.
5. In the Stop Record after text box, mark and set
the number in second for the program to continue recording after the alarm has ended. The time
range is 1~999 seconds. If user doesn
’t mark and set the time, the alarm recording will continue
recording until alarm is reset.
6. Click OK to accept the new settings and Cancel to exit without saving.