AVer EH6216H+ user manual - Manual (Page 76)

68
a warming message dialog is popup and click OK to continue it.
In IP setting window, user can configure IP camera ’s IP, Mask, Gateway, and Web port. Also, user can
change camera ’s IP mode – DHCP or Static IP. In Local IP Information section, it displays current DVR
system’s IP, Mask, and Gateway. After configuring, click OK and the new setting will apply to the IP
camera. In Search Result window, click OK to back to IP Camera Settings window.
7. If the IP camera has authority request, please enable Authentication and enter ID and Password.
8. Click OK to connect with the IP camera.