AVer EH6216H+ user manual - Manual (Page 126)

118
4.1.4.4 Network Setting
In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving,
and click Default to revert back to original factory setting. For the network service ports that use by DVR
server, please see Appendix A .
(1) Server Name
Assign a name for the DVR unit. Alphabet letters and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it accessible via
internet using PCViewer, Remote Console, PDA Viewer and JavaViewer (still image). To select all the
cameras, enable the ALL check box.
(3) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the Time Server IP address or domain name.
Select the Time Zone that DVR is located. And then, mark the Automatic Synchronize time to set automatic
synchronize time on a daily basis.